Grating clips are used to attach grating to structural members. They are applied with simple hand tools with no power tools needed.
It is the most positive and traditional fastening method. Grating is field welded to support.
Stud bolts are centered between two main bars and welded to supporting members. U-shaped clip engaging two main bearing bars is placed over stud bolt and then hexnut is tightened.
Traditional method of attaching gratings – drill / bolt to beams. Holes are drilled into the beam to suit 1/4’ (“ – inch) screws, and the screw is fitted after which the nut can be screwed on from below. Alternatively the hole in the beam can be threaded and the clip can be fitted from the above.
To be used where site welding and drilling is not at all allowed.
On sites where welding is not permitted or for removable gratings use saddle clip and slotted clamp as above.
Indiana also supplies HILTI Clamps. They are sturdy, attractive and easy to fix.